Specifications
Gap And Flush Dimensions
▸Contents: 31 - Collision Information
Position Statements
- Authentic Mopar® Glass Replacement
- Reconditioned Wheel Usage
- Replacement Seat Covers And Seat Cover Repairs
- Salvaged Air Bags Or Other Salvaged Restraint System Component Usage
- SCAN TOOL SUPPORT BEFORE and AFTER COLLISION REPAIR
- Steering System
- Repair Parts Used For Structural Repairs
- Use Of Aftermarket Parts
- Use Of Heat While Repairing Damaged Structural And Non-Structural Components
- Use Of Optional Oe Parts
- Bumper/Fascia Repair With Adas
- One-Time-Use Parts & Fasteners
Standard Procedure
- Service After A Supplemental Restraint System Deployment
- Handling Non-Deployed Supplemental Restraints
- Post Collision Seat Belt Inspection
- Post Collision Scan Tool Inspection
- Recalibration Of Sensors And Modules
- Basecoat/Clearcoat Finish
- Finesse Sanding, Buffing, And Polishing
- Paint Touch-Up
- Rivet Nut Procedure
- Roof Panel Weld Stud
- Non-Structural Sheet Metal Repair
- Welding And Weld Bonding
- Sectioning Locations And Procedures
- Hoisting And Jacking
- Stationary Glass
- Corrosion Protection
Approved Materials
| NOTE: |
Crew cab shown. Quad cab similar. |
| NOTE: |
For TRX model specific information refer to . |
All measurements are in millimeters.
|
DIMENSION |
DESCRIPTION |
GAP |
FLUSH |
|---|---|---|---|
|
1 |
Hood to Upper Grill Bezel |
6.3 +/- 2.0 Parallel within 2.5 at Center |
— |
|
2 |
Body Side Aperture to Windshield |
4.0 +/- 1.7 Parallel within 1.5 |
Body Side Aperture O/F 17.0 at Bottom Transition to 8.3 at Top +/- 1.7 Consistent within 1.7 |
|
3 |
Roof to Windshield (Without Sunroof) |
4.0 +/- 1.7 Parallel within 1.7 |
Windshield U/F 2.2 Transition to 1.7 Outboard +/- 1.7 Consistent within 1.7 |
|
3 |
Roof to Windshield (With Sunroof) |
4.0 +/- 1.7 Parallel within 1.7 |
Windshield U/F 2.0 +/- 1.7 Transition to 1.6 Outboard +/- 1.7 Consistent within 1.5 |
|
4 |
Front Sunroof Glass to Roof |
— |
0.0 +/- 1.5 |
|
5 |
Front Sunroof Glass to Rear Sunroof Glass |
1.2 |
Rear Glass U/F 0.0 + 2.0 |
|
6 |
Rear Sunroof Glass to Roof |
— |
0.0 +/- 1.5 |
|
7 |
Ram Box Cap to Box Side Panel |
0.0 +/- 1.5 |
Cap U/F 2.5 +/- 1.5 Consistent within 1.5 Side to Side within 3.0 |
|
8 |
Ram Box Cap to Ram Box Lid |
6.0 +/- 1.5 Parallel within 1.5 |
0.0 +/- 1.5 Consistent within 1.5 |
|
9 |
Ram Box Lid to Box Side Panel |
5.0 +/- 2.0 Parallel within 2.0 Side to Side within 3.0 |
0.0 +/- 2.0 Consistent within 2.0 Side to Side within 3.0 |
|
10 |
Box Side Panel to Fuel Filler Door |
2.5 +/- 0.9 Parallel within 0.9 |
Fuel Door U/F 0.9+/- 0.9 Consistent within 1.0 |
|
11 (Crew Cab) |
Box Side Panel to Body Side Aperture |
29.7 at Top Transition to 31.6 to 29.1 at Bottom +/- 3.6 Parallel within 1.7 |
5’ 7” Box U/F 4.3 at Top Transition to 7.7 to 4.0 at Bottom +/- 3.0 6’ 4" Box U/F 4.1 at Top Transition to 8.0 to 4.8 at Bottom +/- 3.0 Consistent within 2.1 |
|
11 (Quad Cab) |
Box Side Panel to Body Side Aperture |
28.1 at Top Transition to 31.6 to 29.1 at Bottom +/- 3.6 Parallel within 1.7 |
6’ 4" Box U/F 4.4 at Top Transition to 6.7 to 2.8 at Bottom +/- 3.0 Consistent within 2.1 |
|
12 |
Front Door to Rear Door (Above Belt) |
4.5 to 1.5 Parallel within 1.5 |
0.0 +/- 1.2 Consistent within 1.2 |
|
12 |
Front Door to Rear Door (Below Belt) |
4.5 to 1.5 Parallel within 1.5 |
Front Door O/F 0.5 +/- 1.2 Transition to 0.0 at top Consistent within 1.2 |
|
13 |
Fender to Body Side Aperture |
3.0 +/- 1.3 Parallel within 1.3 Side to Side within 1.3 |
0.0 +/- 1.3 Consistent within 1.3 |
|
14 |
Hood to Fender |
4.0 at Front Transition to 4.4 at Rear +/- 1.5 Parallel within 1.5 Side to Side within 1.3 |
Hood U/F 0.5 at Front +/- 1.5 Transition at Incline and Rear to 0.0 +/- 1.5 Consistent within 1.5 Side to Side within 1.5 |
|
15 |
Fender to Fascia |
0.0 + 0.5 |
Fascia U/F 0.5 +/- 0.5 Transition to 0.0 at lamp +/- 0.5 |
|
16 |
Grill to Fender |
4.3 Transition to 2.0 at Outboard +/- 1.5 Parallel within 1.5 Side to side within 1.5 |
— |
|
17 |
Headlamp to Upper Grill Applique |
2.0 +/- 1.5 Parallel within 1.5 |
— |
|
18 |
Grill to Fascia |
4.0 Cross car Transition to 3.0 U/D at top +/- 1.5 Parallel within 1.5 |
— |
|
19 |
Grill to Bumper |
16.0 +/- 4.0 Parallel within 4.0 |
— |
|
20 |
Roof to Sliding Backlite Glass |
3.5 +/- 1.5 Parallel within 1.5 |
Glass U/F 2.0 +/- 1.5 Consistent within 1.5 |
|
20 |
Roof to Fixed Backlite Glass |
2.8 +/- 1.5 Without sunroof - Transition to 2.3 Outboard Parallel within 1.5 |
Glass U/F 6.0 +/- 1.5 Consistent within 1.5 |
|
21 |
Center High Mounted Stop Lamp to Roof |
1.5 +/- 1.0 Parallel within 1.0 |
Varies +/- 1.0 Consistent within 1.0 |
|
22 |
Sliding Backlite Glass to Body Side Aperture |
3.5 +/- 1.5 Parallel within 1.5 |
Glass U/F 2.0 +/- 1.5 Consistent within 1.5 |
|
22 |
Fixed Backlite Glass to Body Side Aperture |
3.5 +/- 1.5 Parallel within 1.5 |
Glass U/F 6.0 +/- 1.5 Consistent within 1.5 |
|
23 |
Rear Door to Body Side Aperture (Crew Cab) |
4.5 +/- 1.5 Parallel within 1.5 |
Body Side Aperture O/F 1.5 Transition to 1.9 at rear +/- 1.5 Consistent within 1.5 |
|
23 |
Rear Door to Body Side Aperture (Quad Cab) |
4.5 +/- 1.5 Parallel within 1.5 |
Body Side Aperture O/F 1.4 Transition to 1.7 at Rear +/- 1.5 Consistent within 1.5 |
|
24 |
Front Door Molding to Rear Door Molding |
4.5 +/- 2.0 |
0.0 +/- 1.7 |
|
25 |
Front Door to Body Side Aperture |
4.5 +/- 1.5 Parallel within 1.5 |
Body Side Aperture O/F 1.4 at Top Transition to 2.1 at Corner to 1.1 to 1.6 to 0.8 at Front +/- 1.5 Consistent within 1.5 |
|
26 |
Mirror Flag Molding to Day Light Opening Molding |
0.0 + 0.5 |
0.0 +/- 0.5 |
|
27 |
Fender to Headlamp |
2.0 +/- 1.2 Parallel within 1.2 |
— |
|
28 |
Fender to Front Door |
4.5 +/- 1.5 Parallel within 1.5 |
Fender O/F 0.5 at Bottom Transition to 0.0 at Belt Line to 0.8 at Top +/- 1.2 Consistent within 1.2 |
|
29 |
Body Side Aperture to Front Door |
4.5 +/- 1.5 Parallel within 1.5 |
Door U/F 6.2 at Front Transition to 5.9 at Rear +/- 1.5 Consistent within 1.5 |
|
30 |
Front Door Applique to Rear Door Applique |
4.3 +/- 1.5 Parallel within 1.5 |
Front Door Applique 0.0 at Top Transition to O/F 0.2 to 0.0 at Bottom +/- 1.5 Consistent within 1.5 |
|
31 |
Body Side Aperture to Rear Door |
4.5 +/- 1.5 Parallel within 1.5 |
Door U/F 6.2 at Front Transition to 5.6 at Rear to 0.5 after Rear Corner +/- 1.5 Consistent within 1.5 |
|
32 |
Rear Door to Body Side Aperture (Above Belt) |
4.5 +/- 1.5 Parallel within 1.5 |
0.0 Transition to 1.4 at Top Corner +/- 1.2 Consistent within 1.2 |
|
32 |
Rear Door to Body Side Aperture (Below Belt) |
4.5 +/- 1.5 Parallel within 1.5 |
Door O/F 0.5 +/- 1.2 Transition to 0.0 at Top Corner +/- 1.2 Consistent within 1.5 |
|
33 |
Box Side Panel to Tail Lamp |
1.5 +/- 1.2 Parallel within 1.2 Side to side within 1.2 |
0.0 +/- 1.2 Consistent within 1.2 |
|
34 |
Rear Bumper to Box Side Panel |
16.0 at front +/- 4.0 Parallel within 4.0 18.0 +/- 4. Parallel within 4.0 |
— |
|
35 |
Tailgate Handle to Tailgate |
1.0 +/- 1.0 Parallel within 1.0 |
0.0 +/- 1.0 Consistent within 1.0 |
|
36 |
Rear Bumper to Standard Tailgate |
33.3 +/- 4.0 Parallel within 4.0 |
— |
|
37 |
Standard Tailgate to Tail Lamp |
6.0 +/- 1.5 Parallel within 1.5 Side to Side within 1.5 |
Lamp O/F 1.2 at top Transition to 0.0 at Bottom +/- 1.5 Consistent within 1.5 |
|
38 |
Box Side Panel to Tailgate |
4.0 +/- 1.5 Parallel within 1.5 Side to Side within 1.5 |
Box Side Panel O/F 0.5 +/- 1.2 Consistent within 1.5 Side to Side within 1.2 |
|
39 |
Tailgate Spoiler to Multi-Function Tailgate |
0.0 + 1.5 Parallel within 1.5 |
Spoiler U/F 2.0 +/- 1.5 Consistent within 1.5 |
|
40 |
Right Tailgate Spoiler to Left Tailgate Spoiler |
13.3 at Front Transition to 13.9 at Rear +/- 2.9 Parallel within 2.2 |
0.0 +/- 1.5 Consistent within 1.5 |
|
41 |
Rail Cap to Tailgate Spoiler |
13.6 at Front Transition to 13.9 at Rear +/- 2.2 Parallel within 2.2 |
0.0 +/- 2.1 Consistent within 1.6 |
|
42 |
Right Multi-Function Tailgate to Left Multi-Function Tailgate |
4.5 +/- 2.4 Parallel within 1.5 |
0.0 +/- 1.5 Consistent within 1.7 |
|
43 |
Exhaust Tip to Rear Bumper |
U/D 28.7 +/- 4.0 Cross Car Inboard 28.3 +/- 4.0 Cross Car Outboard 28.9 +/- 4.0 Parallel within 4.0 Side to Side within 4.0 |
F/A Tip O/F 1.8 +/- 4.0 Side to Side within 4.0 |
|
44 |
Rear Bumper to Tailgate |
33.3 +/- 4.0 Parallel within 4.0 |
— |
|
45 |
Tail Lamp to Multi-Function Tailgate |
6.3 +/- 2.3 Parallel within 2.1 Side to Side within 1.5 |
Lamp O/F 1.2 at Top Transition to 0.0 at Bottom +/- 1.6 Consistent within 1.5 |
|
46 |
Box Side Panel to Multi-Function Tailgate |
5.0 +/- 1.5 Parallel within 1.5 Side to Side within 1.5 |
Box Side O/F 0.5 +/- 1.2 Consistent within 1.5 Side to Side within 1.2 |
| NOTE: |
TRX model specific specifications shown. For other specifications refer to standard model above. |
All measurements are in millimeters.
TRX
|
DIMENSION |
DESCRIPTION |
GAP |
FLUSH |
|---|---|---|---|
|
1 |
Hood to Upper Grill Applique |
6.0 +/- 2.0 Parallel within 2.5 at Center |
Applique U/F 1.8 at Inboard +/- 1.5 Transition at Decline to 1.0 at Headlamp +/- 1.5 Consistent within 2.3 |
|
2 |
Hood Scoop to Hood (Exclude Lower Incline) |
0.0 +/- 0.5 at Rear 0.8 +/- 0.5 at Front |
0.0 +/- 0.5 at Front |
|
3 |
Cowl Side Trim to Windshield |
0.0 |
0.0 +/- 0.5 |
|
4 |
Hood Vent to Hood |
1.5 +/- 0.5 Parallel within 1.5 |
0.0 at Front and Outboard +/- 0.5 Vent O/F 1.4 at Inboard Rear +/- 0.5 |
|
5 |
Headlamp Vent to Upper Fascia |
1.7 +/- 0.5 at Front 0.0 +/- 0.5 at Corner 1.5 +/- 0.5 at Side Parallel within 1.5 |
— |
|
6 |
Upper Fascia to Fender |
0.0 +/- 0.5 |
Fascia U/F 0.5 +/- 0.5 Transition to 0.0 at Headlamp+/- 0.5 |
|
7 |
Hood to Fender |
4.6 at Front +/- 1.5 Transition to 4.2 at Incline +/- 1.5 Transition to 4.4 at A-Pillar +/- 1.5 Parallel within 1.5 Side to Side within 1.5 |
Hood U/F 0.5 +/- 1.5 Transition to 0.0 at Incline +/- 1.5 Transition to Hood O/F 0.7 at Rear +/- 1.5 Consistent within 1.5 Side to Side within 1.5 |
|
8 |
Fender to Body Side Aperture at A-Pillar |
3.0 +/- 1.5 Parallel within 1.3 Side to Side within 2.1 |
0.0 +/- 1.5 Consistent within 1.5 |
|
9 |
Fender to Front Door |
4.5 +/- 1.5 Parallel within 1.5 |
Fender O/F 0.5 +/- 1.5 Transition to 0.0 at Belt Line +/- 1.5 Transition to 0.8 at Top +/- 1.5 Consistent within 1.3 |
|
10 |
Side Fender Vent to Door |
4.9 +/- 1.5 Parallel within 1.5 |
Vent O/F 0.1 +/- 1.5 Consistent within 1.5 |
|
11 |
Front Flare to Fender |
0.0 Cross Car + 0.8 |
— |
|
12 |
Fender Flare to Wheel Flare Extension |
16.0 +/- 4.4 Parallel within 2.6 Side to Side within 5.5 |
Fender Flare U/F 0.8 at Front +/- 3.6 Transition to 0.3 at Rear +/- 3.6 Side to Side within 6.0 |
|
13 |
Grille Surround to Upper Fascia |
1.3 at Incline +/- 1.5 1.9 at Corner +/- 1.5 1.5 at Top +/- 1.5 |
— |
|
14 |
Headlamp to Upper Grille Applique |
2.0 +/- 1.5 Parallel within 1.6 |
— |
|
15 |
Tow Hook to Tow Hook Bezel |
U/D 11.6 at Inboard Upper +/- 4.0 Cross Car 12.5 at Inboard +/- 4.0 F/A 12.5 at Bottom and Top +/- 4.0 Parallel within 4.0 |
— |
|
16 |
Grill Surround to Front Bumper |
U/D 16.0 +/- 4.0 Parallel within 4.0 |
— |
|
17 |
Upper Grill Texture to Front Bumper |
19.5 +/- 3.5 Parallel within 3.5 |
— |
|
18 |
Upper Fascia to Front Bumper |
15.5 at Front Inboard +/- 4.0 22.0 at Rear Outboard +/- 4.0 Parallel within 4.0 Side to Side within 5.5 |
Fascia U/F 4.0 at Front Outboard +/- 4.0 Fascia U/F 1.0 at Rear Outboard +/- 4.0 Consistent within 5.1 Side to Side within 5.5 |
|
19 |
Grill Surround to Headlamp |
2.3 U/D to 3.7 Cross Car +/- 2.3 Parallel within 1.5 |
— |
|
20 |
Outer Upper Gill Applique Grill to Center Upper Gill Applique |
1.5 +/- 0.5 Parallel within 1.5 Side to Side within 0.5 |
0.0 +/- 0.5 Consistent within 0.5 |
|
21 |
Box Side Panel to Tailgate |
4.0 +/- 1.5 Parallel within 1.5 Side to Side within 1.5 |
Box Side Upper O/F 0.5 +/- 1.5 Box Side Lower O/F below Lamp 1.0 +/- 1.5 Box Side Lower O/F at Bottom 0.7 +/- 1.5 Consistent within 1.5 Side to Side within 1.5 |
|
22 |
Box Side Vent to Box Side Outer Panel |
0.0 + 1.1 Parallel within 1.5 |
— |
|
23 |
Front Box Spat to Rear Wheel Flare |
3.0 +/- 1.6 |
Spat U/F 1.4 at Front +/- 1.5 Transition to 2.4 to 1.3 at Rear +/- 1.5 |
|
24 |
Box Side Panel to Body Side Aperture |
28.1 at Top +/- 3.6 Transition to 31.5 to 28.9 at Bottom +/- 3.6 Parallel within 1.7 |
Box U/F 6.9 at Top +/- 3.0 Transition to 2.5 to 3.8 at Bottom +/- 3.0 Consistent within 2.1 |
|
25 |
Rear Wheel Flare to Box Side Panel |
0.0 Cross Car + 0.8 |
— |
|
26 |
Rear Box Side Spat to Rear Wheel Flare |
3.0 + 1.6 |
Spat U/F 1.6 +/- 1.5 |
|
27 |
Rear Bumper to Box Side Panel |
16.2 at Top +/- 4.0 Transition to 16.5 to 16.1 at Bottom +/- 4.0 Parallel within 4.0 |
— |
|
28 |
Box Side Vent to Tail Lamp |
Front Cross Car 1.5 +/- 1.2 Front Lower U/D 2.0 at Front to 1.6 to 2.3 at Tailgate +/- 1.2 |
Tail Lamp U/F 2.2 +/- 1.2 |
|
29 |
Rear Bumper to Tailgate |
33.3 +/- 4.0 Parallel within 4.0 |
— |
|
30 |
Tailgate Handle to Tailgate |
1.0 +/- 1.0 Parallel within 1.0 |
0.0 +/- 1.0 Consistent within 1.0 |
|
31 |
Exhaust Tip to Rear Bumper |
U/D 35.1 +/- 4.0 Cross Car Inboard 27.9 +/- 4.0 Cross Car Outboard 27.4 +/- 4.0 Parallel within 4.0 |
F/A Tip O/F 7.1 +/- 4.0 Side to Side within 4.0 |
|
27 |
Rear Bumper to Box Side Panel |
16.3 at Front +/- 4.0 Transition to 19.9 to 18.3 to 19.9 to 18.4 at Tailgate +/- 4.0 Parallel within 4.0 |
— |
|
32 |
Rear Bumper to Box Side Panel |
16.3 at Front +/- 4.0 Transition to 19.9 to 18.3 to 19.9 to 18.4 at Tailgate +/- 4.0 Parallel within 4.0 |
— |
|
33 |
Tailgate to Tail Lamp |
5.5 +/- 1.5 Parallel within 1.5 Side to Side within 1.5 |
Lamp O/F 1.2 at Top Transition to U/F 0.4 to 0.0 at Bottom +/- 1.5 Consistent within 1.5 |