Position Statements
Authentic Mopar® Glass Replacement
▸Contents: 31 - Collision Information
Position Statements
- Authentic Mopar® Glass Replacement
- Reconditioned Wheel Usage
- Replacement Seat Covers And Seat Cover Repairs
- Salvaged Air Bags Or Other Salvaged Restraint System Component Usage
- SCAN TOOL SUPPORT BEFORE and AFTER COLLISION REPAIR
- Steering System
- Repair Parts Used For Structural Repairs
- Use Of Aftermarket Parts
- Use Of Heat While Repairing Damaged Structural And Non-Structural Components
- Use Of Optional Oe Parts
- Bumper/Fascia Repair With Adas
- One-Time-Use Parts & Fasteners
Standard Procedure
- Service After A Supplemental Restraint System Deployment
- Handling Non-Deployed Supplemental Restraints
- Post Collision Seat Belt Inspection
- Post Collision Scan Tool Inspection
- Recalibration Of Sensors And Modules
- Basecoat/Clearcoat Finish
- Finesse Sanding, Buffing, And Polishing
- Paint Touch-Up
- Rivet Nut Procedure
- Roof Panel Weld Stud
- Non-Structural Sheet Metal Repair
- Welding And Weld Bonding
- Sectioning Locations And Procedures
- Hoisting And Jacking
- Stationary Glass
- Corrosion Protection
Approved Materials
FCA US LLC Position
Only Authentic Mopar® Glass is designed, engineered, manufactured and tested to the FCA US LLC internal and government-mandated standards and are the only parts equivalent to the originally installed parts.
FCA US LLC does not approve of or recognize glass replacement procedures where Authentic Mopar® Parts are not used for Chrysler,® Dodge®, Jeep®, RAM®, and FIAT® brand vehicle’s. Any repairs performed not using Mopar replacement glass, and not following published repair guidelines and procedures, may expose current or future vehicle owners and occupants to unnecessary risk.
FCA’s vehicle’s systems and components are engineered, tested and manufactured to help protect vehicle occupants. They are engineered based upon both government mandated and internal corporate requirements relative to Durability, Noise Vibration Harshness (NVH) and Vehicle Safety.
Authentic Mopar® Glass Characteristics Include and are not Limited to:
- Glass coatings that provide UV protection and in-cabin heat reduction. Aftermarket variants often may not be equipped with reflective technology. This technology optimizes air conditioning performance and can improve fuel economy. The attached moldings have been validated with exposure testing, including UV, chemical, temperature, tear and abrasion resistance.
- Glass may be equipped with enhanced acoustic dampening technologies integrated into the glass assembly. Aftermarket glass may not be equipped with this variant, which may result in increased wind, road, and engine noise in your vehicle’s cabin.
- Works with various advanced driver safety system electrical components, including cameras, rain sensors, antennae, and heating elements. Aftermarket glass may not support the function of complex electrical components and could interfere with your vehicle’s electronic systems, resulting in unintended functions or disabling the system function.
- If your vehicle’s windshield is equipped with a forward facing camera (typically integrated in the rearview mirror assembly), the camera must be recalibrated after the windshield has been installed.
Glass components are also often a part of the vehicle’s structural assembly. Using Mopar authored removal and replacement procedures, including the use of advanced adhesives specific to each model, helps ensure that the vehicle is as design.
Aftermarket glass manufactures may represent their products as Original Equipment Equivalent, or OEE. No supplier is authorized to utilize FCA tooling, test equipment, or Intellectual Property in the development or production of aftermarket glass. Aftermarket windshields and moldings are often made with materials that do not adhere to FCA US LLC performance standards.
Genuine Mopar Parts
FCA US LLC vehicles and authentic Mopar Parts are designed and manufactured to meet production engineered specifications, while maximizing the safety of all occupants in a collision. If a collision repair is necessary, all repairs should be performed by a certified trained technician and follow vehicle-specific repair procedures available at TechAuthority.com using only genuine Mopar parts. Failure to follow proper procedures or deviation from Original Equipment parts could result in compromising performance of impact safety systems. Only authentic Mopar Parts are designed and built to provide optimum fit, function, safety and structural integrity as well as being engineered, manufactured and tested to the FCA US LLC internal and government-mandated standards and are the only parts equivalent to the originally installed parts. These parts are carefully designed to act as a safety system and are rigorously impact tested to ensure optimal performance.
Use of Aftermarket Parts
FCA US LLC does not approve of the use of aftermarket, third-party replacement parts, recycled, salvaged, aftermarket or reconditioned parts. Aftermarket parts are not subject to the same requirements of entire vehicle operation or function and may not be manufactured to the same standards or design. This could compromise the overall safety of the vehicle should a future collision occur. Aftermarket parts may not be built to FCA US LLC’s exact design and can therefore affect the performance of important structural and safety features of the vehicle.
Release Date: December 01, 2025
FCA US LLC vehicle lease agreements specify that ONLY genuine Mopar replacement parts be utilized for collision repairs to the vehicle.
©2026 FCA US LLC. All Rights Reserved. Chrysler, Dodge, Jeep, Ram, Mopar and SRT are registered trademarks of FCA US LLC. FIAT is a registered trademark of Fiat Group Marketing & Corporate Communication S.p.A., used under license by FCA US LLC.