2023 Ram 1500

Diagnosis And Testing

BALL JOINT, Suspension, Lower

▸Contents: 02 - Front Suspension

  1. Raise and support the vehicle (Refer to 04 - Vehicle Quick Reference/Hoisting/Standard Procedure) .
  2. Remove the tire and wheel assembly (Refer to 22 - Tires and Wheels/Removal and Installation) .
  3. Mount a dial indicator securely to the lower control arm.
  4. Position the dial indicator plunger (3) against the lower ball joint stud (2), and zero the dial indicator.

    NOTE:

    Use care not to pry against or tear the ball joint boot when checking the free play.

  5. Position a pry bar (1) between the lower control arm and the steering knuckle and pry gently to check free play.
  6. If the travel exceeds 0.5 mm (0.020 in.), replace the lower control arm (Refer to 02 - Front Suspension/Front/ARM, Lower Control/Removal and Installation) .
  7. Install the tire and wheel assembly (Refer to 22 - Tires and Wheels/Removal and Installation) .
  8. Remove the support and lower vehicle.