2023 Ram 1500

Removal and Installation

Stabilizer Bar Link - Trx/Rumblebee

▸Contents: 02 - Front Suspension

REMOVAL

  1. Raise and support the vehicle (Refer to 04 - Vehicle Quick Reference/Hoisting/Standard Procedure) .
  2. Remove the stabilizer bar link lower nut.

    1 - Stabilizer Bar Link Upper Nut
    2 - Stabilizer Bar Link Lower Nut
  3. Remove the stabilizer bar link upper nut.
  4. Remove the stabilizer bar link.
 

INSTALLATION

Follow the removal procedure in reverse for general reassembly of the components on the vehicle. The steps listed below are calling out specific procedures that should be followed during installation.

  • Place the stabilizer bar link lower ball stud through the lower control arm and place the upper ball stud through the stabilizer bar.
  • Install the stabilizer bar link upper nut and tighten to the proper (Torque Specifications) .
  • Install the stabilizer bar link lower nut and tighten to the proper (Torque Specifications) .