2023 Ram 1500

Removal and Installation

Front Brake Rotor

▸Contents: 05 - Brakes

REMOVAL

  1. Raise and support the vehicle (Refer to 04 - Vehicle Quick Reference/Hoisting - Standard Procedure) .
  2. Remove the wheel and tire assembly (Refer to 22 - Tires and Wheels/Removal and Installation) .

    CAUTION:

    Never allow the disc brake caliper to hang from the brake hose. Damage to the brake hose will result. Provide a suitable support to hang the caliper securely.


    1 - Front Brake Rotor Bolt
  3. Remove the front brake caliper and brake caliper adapter as an assembly (Refer to 05 - Brakes, Base/Hydraulic/Mechanical/ADAPTER, Disc Brake Caliper/Removal And Installation) .
  4. Remove the front brake rotor bolt.
  5. Remove the brake rotor.
 

INSTALLATION

Follow the removal procedure in reverse for general reassembly of the components on the vehicle. The steps listed below are calling out specific procedures that should be followed during installation.

  • Position the brake rotor over the wheel studs and seat it against the hub and bearing.
  • Apply brake pressure several times to seat the brake pads and obtain a firm brake pedal.