2023 Ram 1500

Removal and Installation

Bev

▸Contents: 05 - Brakes

REMOVAL


  1. Disconnect the brake fluid level switch wire harness connector.

    1 - Brake Fluid Level Switch Tabs
    2 - Brake Fluid Level Switch Wire Harness Connector
  2. Release both brake fluid level switch tabs then grasp the connector end of brake fluid level switch and pull it out of brake fluid reservoir.
 

INSTALLATION

Follow the removal procedure in reverse for general reassembly of the components on the vehicle. The steps listed below are calling out specific procedures that should be followed during installation.

  • Insert the brake fluid level switch into the brake fluid reservoir. Be sure to push the switch in until both tabs lock into place in the reservoir.