2023 Ram 1500

Removal and Installation

Front Brake Caliper Adapter

▸Contents: 05 - Brakes

REMOVAL

  1. Raise and support the vehicle (Refer to 04 - Vehicle Quick Reference/Hoisting - Standard Procedure) .
  2. Remove the front wheel and tire assembly (Refer to 22 - Tires and Wheels/Removal and Installation) .

    CAUTION:

    Never allow the disc brake caliper to hang from the brake hose. Damage to the brake hose will result. Provide a suitable support to hang the caliper securely.

  3. Remove the brake caliper from the brake caliper adapter (Refer to 05 - Brakes, Base/Hydraulic/Mechanical/CALIPER, Disc Brake, Front/Removal and Installation) .
  4. Remove the inboard brake pad and the outboard brake pad.

    1 - Brake Caliper Adapter
    2 - Outboard Brake Pad
    3 - Brake Pad Anti-Rattle Clips
    4 - Inboard Brake Pad
    5 - Front Caliper Adapter Bolts
  5. Remove and DISCARD the brake pad anti-rattle clips.
  6. Remove and DISCARD the front caliper adapter bolts.
  7. Remove the brake caliper adapter.
 

INSTALLATION

Follow the removal procedure in reverse for general reassembly of the components on the vehicle. The steps listed below are calling out specific procedures that should be followed during installation.

  • The brake caliper adapters must be free of rust and debris before the anti-rattle clips are installed.
  • Install NEW brake pad anti-rattle clips.
  • Position the brake caliper adapter to the steering knuckle then install NEW front caliper adapter bolts.