2023 Ram 1500

Removal and Installation

Electric Vacuum Pump 3.0l

▸Contents: 05 - Brakes

REMOVAL

  1. Disconnect and isolate the negative battery cable(s) (Refer to 08 - Electrical/Battery System/Standard Procedure) .
  2. Disconnect the electric vacuum pump wire harness connector.

    1 - Vacuum Pump Bolts
    2 - Electric Pump Wire Harness Connector
    3 - Quick Connect Vacuum Line
    4 - Support Bracket Bolt
  3. Release the locking tab and disconnect the quick connect vacuum line from the vacuum pump.
  4. Remove the vacuum pump bolts and remove the vacuum pump.
  5. If necessary to remove the vacuum pump bracket, remove the charge air cooler hose to support bracket bolt.
  6. Remove the vacuum pump bracket bolts.

    1 - Vacuum Pump Bracket Bolts
  7. Remove the vacuum bracket.
 

INSTALLATION

Follow the removal procedure in reverse for general reassembly of the components on the vehicle.


TORQUE SPECIFICATIONS - BRAKES BASE