99 results for “Frame”
- Service Information / 02 - Front Suspension / Air Suspension / Description and OperationAir Suspension
…or is powered by an electric 12-volt motor and is mounted outside the frame rail in the right rear of the vehicle. The air compressor features redundant air pressure sensors, which may aid in diagnosi…
- Service Information / 02 - Front Suspension / Air Suspension / Standard ProcedureComplete System Fill
…ear air springs, but the spring is still seated in the axle perch and frame pocket. With a scan tool, using the routines under the Air Suspension Control Module (ASCM), perform the short fill routine…
- Service Information / 02 - Front Suspension / Air Suspension / AIR LINE / Removal and InstallationFront Air Lines
…ine routing clips that are attaching the front air line bundle to the frame. Remove the front air lines. INSTALLATION Follow the removal procedure in reverse for general reassembly of the components o…
- Service Information / 02 - Front Suspension / Air Suspension / AIR LINE / Removal and InstallationRear Air Lines
…line routing clips that are attaching the rear air line bundle to the frame. Remove the rear air lines. INSTALLATION Follow the removal procedure in reverse for general reassembly of the components on…
- Service Information / 02 - Front Suspension / Front, Independent Front Suspension / Description and OperationFront Suspension
…x The stabilizer bar is constructed from steel. The bar mounts to the frame front crossmember through two rubber/urethane bushings and two steel mounting brackets. Stabilizer bar links are connected a…
- Service Information / 02 - Front Suspension / Front, Independent Front Suspension / Diagnosis and TestingDiagnosis And Testing
…l bearing 1. Replace wheel bearing. 2. Engine mount grounding against frame or body of vehicle 2. Check for motor mount hitting frame rail and reposition engine as required. 3. Worn or broken C/V join…
- Service Information / 02 - Front Suspension / Front, Independent Front Suspension / Technical SpecificationsTorque Specifications
…Nut (TRX) 138 + 305° N·m (102 + 305° Ft. Lbs.) – Upper Shock Mount to Frame 63 N·m (46 Ft. Lbs.) Do not reuse these fasteners. If removed, a new fastener must be installed and tightened to specificati…
- Service Information / 02 - Front Suspension / Front, Independent Front Suspension / HUB AND BEARING / Diagnosis and TestingDiagnosis And Testing - Hub And Bearing Noise
…Nuts 1. Verify Wheel Lug Nut Torque 2. Engine Mount Grounding Against Frame Or Body Of Vehicle 2. Check For Engine Mount Hitting Frame Rail And Reposition Engine As Required 3. Worn Tires or Incorrect…
- Service Information / 02 - Front Suspension / Front, Independent Front Suspension / HUB AND BEARING / Removal and InstallationHub And Bearing
…Nut (RHO) 138 + 305° N·m (102 + 305° Ft. Lbs.) – Upper Shock Mount to Frame 63 N·m (46 Ft. Lbs.) Do not reuse these fasteners. If removed, a new fastener must be installed and tightened to specificati…
- Service Information / 02 - Front Suspension / Front, Independent Front Suspension / SHOCK ABSORBER, Suspension / Removal and InstallationCoil Over With Trx
…emoval and Installation) . Remove the front skid plate (Refer to 13 - Frame and Bumpers/Under Body Protection/PLATE, Skid, Front/Removal and Installation) . Remove the reservoir bracket bolt. 1 - Rese…
- Service Information / 02 - Front Suspension / Front, Independent Front Suspension / SPRING, Front / Removal and InstallationFront Coil Spring
…Nut (RHO) 138 + 305° N·m (102 + 305° Ft. Lbs.) – Upper Shock Mount to Frame 63 N·m (46 Ft. Lbs.) Do not reuse these fasteners. If removed, a new fastener must be installed and tightened to specificati…
- Service Information / 02 - Front Suspension / Front, Independent Front Suspension / STABILIZER BAR, Front / Removal and InstallationFront Stabilizer Bar
…the stabilizer bar to ensure there is no interference with the either frame rail or chassis component. Spacing should be equal on both sides. Install the four stabilizer bar bolts and tighten to the p…
- Service Information / 02 - Front Suspension / Wheel Alignment / Standard ProcedureAlignment
…Nut (RHO) 138 + 305° N·m (102 + 305° Ft. Lbs.) – Upper Shock Mount to Frame 63 N·m (46 Ft. Lbs.) Do not reuse these fasteners. If removed, a new fastener must be installed and tightened to specificati…
- Service Information / 03 - Differential and Driveline / Description and OperationRear Axles - C235 And Rba260
…rear axle and is position laterally between the axle housing and the frame. The track bar has rubber/urethane bushings at each end. The track bar keeps the rear axle centered in relation to the vehic…
- Service Information / 03 - Differential and Driveline / Description and OperationRear Axle - M250 (2021 - Present)
…rear axle and is position laterally between the axle housing and the frame. The track bar has rubber/urethane bushings at each end. The track bar keeps the rear axle centered in relation to the vehic…
- Service Information / 03 - Differential and Driveline / Standard ProcedureC235 Drain And Refill
…to Differential Housing Nuts 25 N⋅m (18 Ft. Lbs.) – Coolant Lines To Frame Bolts 11 N⋅m (97 In. Lbs.) – Differential Cover Bolts 44 N⋅m (32 Ft. Lbs.) – E-Locker Pass Through Connector Bolt 11 N⋅m (97…
- Service Information / 03 - Differential and Driveline / Technical SpecificationsTorque Specifications
…to Differential Housing Nuts 25 N⋅m (18 Ft. Lbs.) – Coolant Lines To Frame Bolts 11 N⋅m (97 In. Lbs.) – Differential Cover Bolts 44 N⋅m (32 Ft. Lbs.) – E-Locker Pass Through Connector Bolt 11 N⋅m (97…
- Service Information / 03 - Differential and Driveline / Removal and Installation215fd - 3.0l Diesel
…tandard Procedure) . Remove the skid plate if equipped (Refer to 13 - Frame and Bumpers/Under Body Protection/PLATE, Skid, Front/Removal and Installation) . Remove the half shafts (Refer to 03 - Diffe…
- Service Information / 03 - Differential and Driveline / Removal and Installation215fd - 3.6l Engine
…tandard Procedure) . Remove the skid plate if equipped (Refer to 13 - Frame and Bumpers/Under Body Protection/PLATE, Skid, Front/Removal and Installation) . Remove the half shafts (Refer to 03 - Diffe…
- Service Information / 03 - Differential and Driveline / Removal and Installation215fd - 5.7l - 6.2l Engine
…tandard Procedure) . Remove the skid plate if equipped (Refer to 13 - Frame and Bumpers/Under Body Protection/PLATE, Skid, Front/Removal and Installation) . Remove the halfshafts (Refer to 03 - Differ…
- Service Information / 03 - Differential and Driveline / Removal and InstallationC235 – Without Air Suspension
…o the lift. Remove and DISCARD the track bar axle bolt. 1 – Track Bar Frame Bolt 2 – Track Bar Axle Bolt Remove both lower shock absorber bolts and nuts and position the shock absorbers away from the…
- Service Information / 03 - Differential and Driveline / Removal and InstallationC235 – With Air Suspension
…o the lift. Remove and DISCARD the track bar axle bolt. 1 – Track Bar Frame Bolt 2 – Track Bar Axle Bolt Carefully unsnap the lower end of the left and right height sensor level arms from the ball stu…
- Service Information / 03 - Differential and Driveline / Removal and InstallationC235 – Thermal Rear Axle
…o the lift. Remove and DISCARD the track bar axle bolt. 1 - Track Bar Frame Bolt 2 - Track Bar Axle Bolt Remove and DISCARD the upper control arm bracket bolts and nuts and position the upper control…
- Service Information / 03 - Differential and Driveline / Removal and InstallationRba260 – Without Air Suspension
…o the lift. Remove and DISCARD the track bar axle bolt. 1 – Track Bar Frame Bolt 2 – Track Bar Axle Bolt Remove both lower shock absorber bolts and nuts and position the shock absorbers away from the…
- Service Information / 03 - Differential and Driveline / Removal and InstallationRba260 – With Air Suspension
…o the lift. Remove and DISCARD the track bar axle bolt. 1 – Track Bar Frame Bolt 2 – Track Bar Axle Bolt Carefully unsnap the lower end of the left and right height sensor level arms from the ball stu…
- Service Information / 03 - Differential and Driveline / ASSEMBLY, Differential / Removal and InstallationDifferential Assembly - C235 - Open
…to Differential Housing Nuts 25 N⋅m (18 Ft. Lbs.) – Coolant Lines To Frame Bolts 11 N⋅m (97 In. Lbs.) – Differential Cover Bolts 44 N⋅m (32 Ft. Lbs.) – E-Locker Pass Through Connector Bolt 11 N⋅m (97…
- Service Information / 03 - Differential and Driveline / ASSEMBLY, Differential / Removal and InstallationDifferential Assembly - C235 - Limited Slip
…to Differential Housing Nuts 25 N⋅m (18 Ft. Lbs.) – Coolant Lines To Frame Bolts 11 N⋅m (97 In. Lbs.) – Differential Cover Bolts 44 N⋅m (32 Ft. Lbs.) – E-Locker Pass Through Connector Bolt 11 N⋅m (97…
- Service Information / 03 - Differential and Driveline / ASSEMBLY, Differential / Removal and InstallationDifferential Assembly - C235 - Electric Locking
…to Differential Housing Nuts 25 N⋅m (18 Ft. Lbs.) – Coolant Lines To Frame Bolts 11 N⋅m (97 In. Lbs.) – Differential Cover Bolts 44 N⋅m (32 Ft. Lbs.) – E-Locker Pass Through Connector Bolt 11 N⋅m (97…
- Service Information / 03 - Differential and Driveline / ACTUATOR/MOTOR / Removal and InstallationFront Axle Disconnect
…AL If equipped, remove the front suspension skid plate (Refer to 13 - Frame and Bumpers/Under Body Protection/PLATE, Skid, Front Suspension/Removal and Installation) . Disconnect the Front Axle Discon…
- Service Information / 03 - Differential and Driveline / BEARINGS / Removal and InstallationAxle Shaft Bearing - C235
…to Differential Housing Nuts 25 N⋅m (18 Ft. Lbs.) – Coolant Lines To Frame Bolts 11 N⋅m (97 In. Lbs.) – Differential Cover Bolts 44 N⋅m (32 Ft. Lbs.) – E-Locker Pass Through Connector Bolt 11 N⋅m (97…
- Service Information / 03 - Differential and Driveline / BEARINGS / Removal and InstallationDifferential Side Bearings - C235
…to Differential Housing Nuts 25 N⋅m (18 Ft. Lbs.) – Coolant Lines To Frame Bolts 11 N⋅m (97 In. Lbs.) – Differential Cover Bolts 44 N⋅m (32 Ft. Lbs.) – E-Locker Pass Through Connector Bolt 11 N⋅m (97…
- Service Information / 03 - Differential and Driveline / COVER / Removal and InstallationDifferential Cover - C235 - Without Thermal Axle
…to Differential Housing Nuts 25 N⋅m (18 Ft. Lbs.) – Coolant Lines To Frame Bolts 11 N⋅m (97 In. Lbs.) – Differential Cover Bolts 44 N⋅m (32 Ft. Lbs.) – E-Locker Pass Through Connector Bolt 11 N⋅m (97…
- Service Information / 03 - Differential and Driveline / COVER / Removal and InstallationDifferential Cover - C235 - With Thermal Axle
…to Differential Housing Nuts 25 N⋅m (18 Ft. Lbs.) – Coolant Lines To Frame Bolts 11 N⋅m (97 In. Lbs.) – Differential Cover Bolts 44 N⋅m (32 Ft. Lbs.) – E-Locker Pass Through Connector Bolt 11 N⋅m (97…
- Service Information / 03 - Differential and Driveline / SEALS / Removal and InstallationAxle Seal - C235
…to Differential Housing Nuts 25 N⋅m (18 Ft. Lbs.) – Coolant Lines To Frame Bolts 11 N⋅m (97 In. Lbs.) – Differential Cover Bolts 44 N⋅m (32 Ft. Lbs.) – E-Locker Pass Through Connector Bolt 11 N⋅m (97…
- Service Information / 03 - Differential and Driveline / SEALS / Removal and InstallationPinion Seal - C235
…to Differential Housing Nuts 25 N⋅m (18 Ft. Lbs.) – Coolant Lines To Frame Bolts 11 N⋅m (97 In. Lbs.) – Differential Cover Bolts 44 N⋅m (32 Ft. Lbs.) – E-Locker Pass Through Connector Bolt 11 N⋅m (97…
- Service Information / 03 - Differential and Driveline / SHAFTS, Axle/Drive/Half / Removal and InstallationAxle Shaft - C235
…to Differential Housing Nuts 25 N⋅m (18 Ft. Lbs.) – Coolant Lines To Frame Bolts 11 N⋅m (97 In. Lbs.) – Differential Cover Bolts 44 N⋅m (32 Ft. Lbs.) – E-Locker Pass Through Connector Bolt 11 N⋅m (97…
- Service Information / 03 - Differential and Driveline / SHAFTS, Axle/Drive/Half / Removal and InstallationFront Driveshaft
…andard Procedure) . If equipped, remove the skid plate (Refer to 13 - Frame and Bumpers/Under Body Protection/PLATE, Skid/Removal and Installation) . Remove the stabilizer bar bushing bolts and let th…
- Service Information / 03 - Differential and Driveline / SHAFTS, Axle/Drive/Half / Removal and InstallationFront Halfshaft
…Nut (RHO) 138 + 305° N·m (102 + 305° Ft. Lbs.) – Upper Shock Mount to Frame 63 N·m (46 Ft. Lbs.) Do not reuse these fasteners. If removed, a new fastener must be installed and tightened to specificati…
- Service Information / 03 - Differential and Driveline / SHAFTS, Axle/Drive/Half / Removal and InstallationRear Driveshaft
…andard Procedure) . If equipped, remove the skid plate (Refer to 13 - Frame and Bumpers/Under Body Protection/PLATE, Skid, Front/Removal and Installation) . If equipped with a two piece driveshaft, us…
- Service Information / 03 - Differential and Driveline / VALVES / Removal and InstallationThree-Way Coolant Valve
…to Differential Housing Nuts 25 N⋅m (18 Ft. Lbs.) – Coolant Lines To Frame Bolts 11 N⋅m (97 In. Lbs.) – Differential Cover Bolts 44 N⋅m (32 Ft. Lbs.) – E-Locker Pass Through Connector Bolt 11 N⋅m (97…
- Service Information / 03 - Differential and Driveline / VALVES / Removal and InstallationThermal Rear Axle Coolant Lines
…dle coolant line set. 1 - Quick Connect Fittings 2 - Coolant Lines To Frame Bolts Remove the coolant lines to frame bolts on the middle coolant line set and remove the lines. Disconnect the quick conn…
- Service Information / 04 - Vehicle Quick Reference / Hoisting / Standard ProcedureHoisting
…he raised position with jack stands at the front and rear ends of the frame rails. NOTE: Vehicles equipped with the air suspension system can be disabled and enabled by using the Display Screen Module…
- Service Information / 05 - Brakes / 05 - Brakes, ABS / Hydraulic/Mechanical / INTEGRATED CONTROL UNIT (ICU) / Removal and InstallationIntegrated Control Unit (Icu) Without Trx
…ed in the connector. Position the ICU and HCU bracket assembly to the frame then install the three Hydraulic Control Unit (HCU) bracket bolts and tighten to the proper (Torque Specifications) . Instal…
- Service Information / 05 - Brakes / 05 - Brakes, ABS / Hydraulic/Mechanical / INTEGRATED CONTROL UNIT (ICU) / Removal and InstallationIntegrated Control Unit (Icu) With Trx
…stem/Standard Procedure) . Remove the front skid plate (Refer to 13 - Frame and Bumpers/Under Body Protection/PLATE, Skid, Front/Removal and Installation) . Remove the front wheelhouse splash shield (…
- Service Information / 05 - Brakes / 05 - Brakes, ABS / Hydraulic/Mechanical / HYDRAULIC CONTROL UNIT (HCU) / Removal and InstallationHydraulic Control Unit (Hcu) Without Trx
…ed in the connector. Position the HCU and HCU bracket assembly to the frame then install the Hydraulic Control Unit (HCU) bracket bolts and tighten to the proper (Torque Specifications) . Install the…
- Service Information / 05 - Brakes / 05 - Brakes, ABS / Hydraulic/Mechanical / HYDRAULIC CONTROL UNIT (HCU) / Removal and InstallationHydraulic Control Unit (Hcu) With Trx
…stem/Standard Procedure) . Remove the front skid plate (Refer to 13 - Frame and Bumpers/Under Body Protection/PLATE, Skid, Front/Removal and Installation) . Remove the front wheelhouse splash shield (…
- Service Information / 08 - Electrical / 8A - Audio/Video/Entertainment/Connectivity / SPEAKER / Diagnosis and TestingDiagnosis And Testing - Speaker
…. Adjacent trim seams. Subwoofer encloser. Adjacent trim panels. Seat frame / brackets. Floor or outer trim near enclosure. Next Step / Pass-Fail Criteria: Pass: If noise changes or stops after applyi…
- Service Information / 08 - Electrical / 8B - Chime/Buzzer/Driver Assist / SENSOR, Park Assist / Removal and InstallationFront Center
…ard Procedure) . Remove the front bumper reinforcement (Refer to 13 - Frame and Bumpers/Bumpers/REINFORCEMENT, Bumper, Front/Removal and Installation) . From the back of the bumper, remove the center…