Standard Procedure
C235 Drain And Refill
▸Contents: 03 - Differential and Driveline
Description and Operation
Diagnosis and Testing
ASSEMBLY, Differential
Disassembly and Assembly
Actuator/Motor
GEAR, Ring and Pinion
Removal and Installation
Joints
SHAFTS, Axle/Drive/Half
Valves
Removal and Installation
| NOTE: | The vehicle must be level to accurately check the fluid level. |
- Raise and support the vehicle.
- Place a suitable drain pan under the rear axle housing.
1 – Drain Plug 2 – Fill Plug - Remove the fill plug.
- Remove the drain plug and allow the fluid to drain.
- Install the drain plug.
- Fill the axle with proper amount of specified fluid (Refer to 04 - Vehicle Quick Reference/Capacities and Recommended Fluids/Specifications) .
- Install the fill plug.
TORQUE SPECIFICATIONS - C235 DIFFERENTIAL