2023 Ram 1500

Removal and Installation

Thermal Rear Axle Coolant Lines

▸Contents: 03 - Differential and Driveline

REMOVAL

  1. Raise and support the vehicle (Refer to 04 - Vehicle Quick Reference/Hoisting/Standard Procedure) .
  2. Drain the cooling system (Refer to 09 - Engine/Cooling Systems/Engine Cooling/Standard Procedure) .
  3. Remove the coolant line to differential cover nuts.

    1 - Coolant Lines To Differential Cover Nuts

  4. Remove the coolant lines from the mounting studs and DISCARD the seals.

    1 - Coolant Lines

  5. Remove the coolant line bracket to differential housing nuts.

    1 - Coolant Line Bracket to Differential Housing Nuts

  6. Disconnect the quick connect fittings from the rear coolant line set.

    1 - Quick Connect Fittings

  7. Remove the coolant lines to crossmember bracket nuts and remove the rear coolant line set.

    1 - Coolant Lines to Crossmember Bracket Nuts

  8. Disconnect the quick connect fittings on the middle coolant line set.

    1 - Quick Connect Fittings
    2 - Coolant Lines To Frame Bolts
  9. Remove the coolant lines to frame bolts on the middle coolant line set and remove the lines.
  10. Disconnect the quick connect fittings for the front coolant line set at the three-way coolant valve and remove the lines.

    1 - Quick Connect Fittings

 

INSTALLATION

Follow the removal procedure in reverse for general reassembly of the components on the vehicle. The steps listed below are calling out specific procedures that should be followed during installation.

 


TORQUE SPECIFICATIONS - C235 DIFFERENTIAL