70 results for “Front Axle”
- Service Information / 03 - Differential and Driveline / Description and OperationFront Axle - 215fd
FRONT AXLE - 215FD The 215FD front axle has an aluminum housing that contains the differential, ring and pinion gears and intermediate shafts. The front axle is mounted to the vehicle chassis. It uses…
- Service Information / 03 - Differential and Driveline / ACTUATOR/MOTOR / Removal and InstallationFront Axle Disconnect
FRONT AXLE DISCONNECT REMOVAL If equipped, remove the front suspension skid plate (Refer to 13 - Frame and Bumpers/Under Body Protection/PLATE, Skid, Front Suspension/Removal and Installation) . Disco…
- Service Information / 03 - Differential and Driveline / SEALS / Removal and InstallationFront Axle Seals - 215fd
FRONT AXLE SEALS - 215FD The following Repair Procedures and Torque Specifications will cover the removal and installation of the left and right axle seals. REPAIR PROCEDURES LEFT AXLE SHAFT SEAL REMO…
- Service Information / 03 - Differential and Driveline / SHAFTS, Axle/Drive/Half / Removal and InstallationAxle Shaft - C235
…astener must be installed and tightened to specifications. Brake Line Front Hose Flare Nut 18 N·m (13 Ft. Lbs.) – Brake Vacuum Pump Bracket 23 N·m (17 Ft. Lbs.) – Brake Vacuum Pump 7 N·m (62 In. Lbs.)…
- Service Information / 03 - Differential and Driveline / SHAFTS, Axle/Drive/Half / Removal and InstallationAxle Shaft - M250
…astener must be installed and tightened to specifications. Brake Line Front Hose Flare Nut 18 N·m (13 Ft. Lbs.) – Brake Vacuum Pump Bracket 23 N·m (17 Ft. Lbs.) – Brake Vacuum Pump 7 N·m (62 In. Lbs.)…
- Service Information / 03 - Differential and Driveline / SHAFTS, Axle/Drive/Half / Removal and InstallationAxle Shaft - Rba260
…astener must be installed and tightened to specifications. Brake Line Front Hose Flare Nut 18 N·m (13 Ft. Lbs.) – Brake Vacuum Pump Bracket 23 N·m (17 Ft. Lbs.) – Brake Vacuum Pump 7 N·m (62 In. Lbs.)…
- Service Information / 03 - Differential and Driveline / SHAFTS, Axle/Drive/Half / Removal and InstallationFront Driveshaft
FRONT DRIVESHAFT REMOVAL Raise and support the vehicle (Refer to 04 - Vehicle Quick Reference/Hoisting/Standard Procedure) . If equipped, remove the skid plate (Refer to 13 - Frame and Bumpers/Under B…
- Service Information / 03 - Differential and Driveline / SHAFTS, Axle/Drive/Half / Removal and InstallationFront Halfshaft
FRONT HALFSHAFT Right Hand (RH) or Left Hand (LH) REMOVAL Raise and support the vehicle (Refer to 04 - Vehicle Quick Reference/Hoisting/Standard Procedure) . If equipped with air suspension, deflate t…
- Service Information / 03 - Differential and Driveline / Diagnosis and TestingAxle Diagnosis
…ource of the noise. If the bearing noise is heard during a coast, the front pinion bearing is the source. Differential bearings usually produce a low pitch noise. Differential bearing noise is similar…
- Service Information / 03 - Differential and Driveline / BEARINGS / Removal and InstallationAxle Shaft Bearing - M250
…astener must be installed and tightened to specifications. Brake Line Front Hose Flare Nut 18 N·m (13 Ft. Lbs.) – Brake Vacuum Pump Bracket 23 N·m (17 Ft. Lbs.) – Brake Vacuum Pump 7 N·m (62 In. Lbs.)…
- Service Information / 03 - Differential and Driveline / SEALS / Removal and InstallationAxle Seal - C235
…astener must be installed and tightened to specifications. Brake Line Front Hose Flare Nut 18 N·m (13 Ft. Lbs.) – Brake Vacuum Pump Bracket 23 N·m (17 Ft. Lbs.) – Brake Vacuum Pump 7 N·m (62 In. Lbs.)…
- Service Information / 03 - Differential and Driveline / SEALS / Removal and InstallationAxle Seal - Rba260
…astener must be installed and tightened to specifications. Brake Line Front Hose Flare Nut 18 N·m (13 Ft. Lbs.) – Brake Vacuum Pump Bracket 23 N·m (17 Ft. Lbs.) – Brake Vacuum Pump 7 N·m (62 In. Lbs.)…
- Service Information / 03 - Differential and Driveline / VALVES / Removal and InstallationThermal Rear Axle Coolant Lines
…t and remove the lines. Disconnect the quick connect fittings for the front coolant line set at the three-way coolant valve and remove the lines. 1 - Quick Connect Fittings INSTALLATION Follow the rem…
- Service Information / 02 - Front Suspension / Air Suspension / Standard ProcedureComplete System Fill
…Air Suspension Control Module (ASCM), perform a Complete Fill on each front spring and shock assembly. Verify that the Tool, Air Suspension Refill 10247B line on/off valve is closed and close and the…
- Service Information / 02 - Front Suspension / Front, Independent Front Suspension / Diagnosis and TestingDiagnosis And Testing
DIAGNOSIS AND TESTING CONDITION POSSIBLE CAUSES POTENTIAL CORRECTIONS FRONT END WHINE ON TURNS 1. Faulty wheel bearing 1. Replace wheel bearing. 2. Incorrect wheel alignment 2. Check and reset wheel a…
- Service Information / 02 - Front Suspension / Front, Independent Front Suspension / HUB AND BEARING / Diagnosis and TestingDiagnosis And Testing - Hub And Bearing Noise
…C TABLE - HUB BEARING CONDITION POSSIBLE CAUSES POTENTIAL CORRECTIONS FRONT END WHINE ON TURNS 1. Low Power Steering Fluid Level (if applicable) 1. Fill the power steering fluid reservoir to the prope…
- Service Information / 02 - Front Suspension / Front, Independent Front Suspension / KNUCKLE, Steering / Removal and InstallationSteering Knuckle
…eels/Removal and Installation) . For TRX equipped vehicles remove the front wheel speed sensor routing bracket bolt. 1 - Speed Sensor Routing Bracket Bolt Disconnect the outer tie rod end from the ste…
- Service Information / 02 - Front Suspension / Front, Independent Front Suspension / SHOCK ABSORBER, Suspension / Removal and InstallationCoil Over With Trx
…ect the stabilizer bar link from the lower control arm (Refer to 02 - Front Suspension/Front/LINK, Stabilizer Bar/Removal and Installation) . Remove the halfshaft (Refer to 03 - Differential and Drive…
- Service Information / 02 - Front Suspension / Wheel Alignment / Technical SpecificationsSpecifications
…ion equipped vehicles are to be aligned at curb height (Refer to 02 - Front Suspension/Wheel Alignment - Standard Procedure) . Front Wheel Alignment Measurement Check Specifications Total Toe** Caster…
- Service Information / 03 - Differential and Driveline / SHAFTS, Axle/Drive/Half / Removal and InstallationOutput Shaft - 215fd
…e seal from the axle tube. 1 - Axle Seal 2 - Axle Tube Disconnect the Front Axle Disconnect (FAD) wire harness connector. 1 - Front Axle Disconnect (FAD) Actuator Bolts 2 - Fill Plug 3 - Drain Plug Re…
- Service Information / 03 - Differential and Driveline / SHAFTS, Axle/Drive/Half / Removal and InstallationRear Driveshaft
…e (Refer to 13 - Frame and Bumpers/Under Body Protection/PLATE, Skid, Front/Removal and Installation) . If equipped with a two piece driveshaft, using a long piece of wood or similar, fasten it to the…
- Service Information / 00 - Vehicle Data / Vehicle Information / International Vehicle Control and Display SymbolsDescription
…Reminder 42 Sway Bar Disconnect Indicator 11 Airbag Warning Light 43 Front Axle Lock 12 Passenger Airbag Off 44 Rear Axle Lock 13 Failure Of Anti-Lock Braking System 45 Park Asist Indicator 14 Hybrid…
- Service Information / 00 - Vehicle Data / Vehicle Information / Vehicle Certification LabelDescription
…of vehicle manufacture. Gross Vehicle Weight Rating (GVWR). The gross front and rear axle weight ratings (GAWR's) are based on a minimum rim size and maximum cold tire inflation pressure. Vehicle Iden…
- Service Information / 03 - Differential and Driveline / Standard ProcedureDrain And Refill
…. Raise and support the vehicle. Place a suitable drain pan under the front axle housing. 1 - Front Differential Drain Plug 2 - Front Differential Fill Plug Remove the fill plug. Remove the drain plug…
- Service Information / 03 - Differential and Driveline / AdjustmentsAdjustments - C235
…bearing cups. 1 - Pinion Height Gauge 2 - Height Block Install a new front pinion bearing and Cone 6740 on the screw. Tighten the cone-nut until the Torque To Rotate (TTR) of the screw is 2.5 N·m (22…
- Service Information / 03 - Differential and Driveline / AdjustmentsAdjustments - M250
…pinion bearing cups. 1 - Pinion Height Gauge 2 - Height Block Install front pinion bearing and Cone-nut Cone 6740 onto the screw. Tighten cone-nut until Torque To Rotate the screw is 2.2 N·m (20 in. l…
- Service Information / 03 - Differential and Driveline / AdjustmentsAdjustments - Rba260
…bearing cups. 1 – Pinion Height Gauge 2 – Height Block Install a NEW front pinion bearing and Cone 6740 on the screw. Tighten the cone-nut until the Torque To Rotate (TTR) of the screw is 2.5 N·m (22…
- Service Information / 03 - Differential and Driveline / Technical SpecificationsTorque Specifications
…d and tightened to specifications. TORQUE SPECIFICATIONS - DRIVESHAFT FRONT DRIVESHAFT CALLOUT DESCRIPTION SPECIFICATION COMMENT 1 Front Driveshaft to Front Axle Bolts 115 N⋅m (85 Ft. Lbs.) Do not reu…
- Service Information / 03 - Differential and Driveline / Removal and Installation215fd - 3.0l Diesel
…d (Refer to 13 - Frame and Bumpers/Under Body Protection/PLATE, Skid, Front/Removal and Installation) . Remove the half shafts (Refer to 03 - Differential and Driveline/SHAFTS, Axle/Drive/Half/Removal…
- Service Information / 03 - Differential and Driveline / Removal and Installation215fd - 3.6l Engine
…d (Refer to 13 - Frame and Bumpers/Under Body Protection/PLATE, Skid, Front/Removal and Installation) . Remove the half shafts (Refer to 03 - Differential and Driveline/SHAFTS, Axle/Drive/Half/Removal…
- Service Information / 03 - Differential and Driveline / Removal and Installation215fd - 5.7l - 6.2l Engine
…d (Refer to 13 - Frame and Bumpers/Under Body Protection/PLATE, Skid, Front/Removal and Installation) . Remove the halfshafts (Refer to 03 - Differential and Driveline/SHAFTS, Axle/Drive/Half/Removal…
- Service Information / 03 - Differential and Driveline / Removal and InstallationC235 – Without Air Suspension
…e Bracket Nuts 9 N⋅m (80 In. Lbs.) TORQUE SPECIFICATIONS - DRIVESHAFT FRONT DRIVESHAFT CALLOUT DESCRIPTION SPECIFICATION COMMENT 1 Front Driveshaft to Front Axle Bolts 115 N⋅m (85…
- Service Information / 03 - Differential and Driveline / BEARINGS / Removal and InstallationDriveshaft Center Bearing
…e installation reference marks on rear shaft, center bearing yoke and front shaft. 1 - Alignment Reference Mark (Center Yoke) 2 - Alignment Reference Mark (Front Shaft) Remove joint from center bearin…
- Service Information / 03 - Differential and Driveline / BEARINGS / Removal and InstallationOutput Shaft Bearing - 215fd
…nd Recommended Fluids/Specifications) . TORQUE SPECIFICATIONS - 215FD FRONT AXLE DRAIN PLUG, FILL PLUG FRONT AXLE DISCONNECT, FRONT AXLE TUBE, FRONT AXLE MOUNTS CALLOUT DESCRIPTION SPECIFICATION COMME…
- Service Information / 03 - Differential and Driveline / GEAR, Ring and Pinion / Removal and InstallationRing And Pinion Gear - C235
…a small chisel or seal puller. 1 – Chisel 2 – Pinion Seal Remove the front pinion bearing. 1 – Front Pinion Bearing 2 – Front Pinion Bearing Cup Remove the front pinion bearing cup using a drift punc…
- Service Information / 03 - Differential and Driveline / GEAR, Ring and Pinion / Removal and InstallationRing And Pinion Gear - M250
…electable washer from behind the rear pinion bearing head. Remove the front pinion bearing cup from the axle housing using a brass drift punch. 1 – Brass Drift Punch 2 – Front Pinion Bearing Cup Remov…
- Service Information / 03 - Differential and Driveline / GEAR, Ring and Pinion / Removal and InstallationRing And Pinion Gear - Rba260
…Flange 5 - Pinion Bearing 3 - Pinion Seal 6 - Pinion Gear Remove the front pinion bearing and oil slinger. Remove the front pinion bearing cup using a drift punch. 1 – Drift Punch 2 – Front Pinion Be…
- Service Information / 03 - Differential and Driveline / SEALS / Removal and InstallationPinion Seal - 215fd
…t necessary to remove the halfshaft from the hub assembly. Remove the front driveshaft (Refer to 03 - Differential and Driveline/Propeller Shaft/SHAFT, Drive/Removal and Installation) . NOTE: The torq…
- Service Information / 03 - Differential and Driveline / SEALS / Removal and InstallationPinion Seal - C235
…astener must be installed and tightened to specifications. Brake Line Front Hose Flare Nut 18 N·m (13 Ft. Lbs.) – Brake Vacuum Pump Bracket 23 N·m (17 Ft. Lbs.) – Brake Vacuum Pump 7 N·m (62 In. Lbs.)…
- Service Information / 03 - Differential and Driveline / SEALS / Removal and InstallationPinion Seal - M250
…astener must be installed and tightened to specifications. Brake Line Front Hose Flare Nut 18 N·m (13 Ft. Lbs.) – Brake Vacuum Pump Bracket 23 N·m (17 Ft. Lbs.) – Brake Vacuum Pump 7 N·m (62 In. Lbs.)…
- Service Information / 03 - Differential and Driveline / SEALS / Removal and InstallationPinion Seal - Rba260
…astener must be installed and tightened to specifications. Brake Line Front Hose Flare Nut 18 N·m (13 Ft. Lbs.) – Brake Vacuum Pump Bracket 23 N·m (17 Ft. Lbs.) – Brake Vacuum Pump 7 N·m (62 In. Lbs.)…
- Service Information / 04 - Vehicle Quick Reference / Fuse - Relay Locations and Types / SpecificationsUnderhood Power Distribution Center
…p Red – Power Side Step F26 50 Amp Red – ESP Module F27 30 Amp Pink – Front Wiper F28 – 10 Amp Red ECM F29 40 Amp Green – ESP Module F30 – – Spare F31 – – Spare F32 20 Amp Blue – ECM / PCM F33 30 Amp…
- Service Information / 04 - Vehicle Quick Reference / Maintenance Schedules / DescriptionNorth America - Diesel
…nspect the CV/Universal joints. X X X X X X X X X X X X X X X Inspect front suspension, tie rod ends, and replace if necessary. X X X X X X X Inspect the front and rear axle fluid. If gear oil leakage…
- Service Information / 04 - Vehicle Quick Reference / Maintenance Schedules / DescriptionNorth America - Gas
…engine air cleaner if using in dusty or off-road conditions. Lube the front drive shaft fitting (2500/3500 (4x4) models only). CAUTION: Failure to perform the required maintenance items may result in…
- Service Information / 04 - Vehicle Quick Reference / Maintenance Schedules / DescriptionNorth America - Trx
…spect the accessory drive belts replace if necessary. X X Inspect the front and rear axle fluid. Change if using your vehicle for any of the following: police, taxi, fleet, sustained high speed drivin…
- Service Information / 04 - Vehicle Quick Reference / Maintenance Schedules / DescriptionBrazil
…CV/Universal joints. X X X X X X X X X X X X X X X X X X X X Inspect front suspension, tie rod ends, and replace if necessary. X X X X X X X X X X Inspect the front and rear axle surfaces. If gear oi…
- Service Information / 04 - Vehicle Quick Reference / Maintenance Schedules / DescriptionLatin America - Diesel
…nspect the CV/Universal joints. X X X X X X X X X X X X X X X Inspect front suspension, tie rod ends, and replace if necessary. X X X X X X X Inspect the front and rear axle fluid. If gear oil leakage…
- Service Information / 04 - Vehicle Quick Reference / Maintenance Schedules / DescriptionLatin America - Gas
…CV/Universal joints. X X X X X X X X X X X X X X X X X X X X Inspect front suspension, tie rod ends, and replace if necessary. X X X X X X X X X X Inspect the front and rear axle surfaces. If gear oi…
- Service Information / 04 - Vehicle Quick Reference / Maintenance Schedules / DescriptionLatin America - Trx
…spect the accessory drive belts replace if necessary. X X Inspect the front and rear axle fluid. Change if using your vehicle for any of the following: police, taxi, fleet, sustained high speed drivin…
- Service Information / 04 - Vehicle Quick Reference / Maintenance Schedules / DescriptionMiddle East
…ressure & correct stowage Replace the air conditioning filter Inspect front & rear axle oil, change if using your vehicle for police, taxi, fleet, off-road, or frequent trailer towing Replace the engi…
- Service Information / 04 - Vehicle Quick Reference / Towing / Standard ProcedureTowing
…owing. When securing the vehicle to a flatbed truck, do not attach to front or rear suspension components. Damage to your vehicle may result from improper towing. CAUTION: Towing this vehicle in viola…
- Service Information / 05 - Brakes / 05 - Brakes, Base / Hydraulic/Mechanical / ADAPTER, Disc Brake Caliper / Removal and InstallationRear Brake Caliper Adapter
…(Refer to 05 - Brakes, Base/Hydraulic/Mechanical/CALIPER, Disc Brake, Front/Removal and Installation) . Remove the inboard brake pad and the outboard brake pad. 1 - Outboard Brake Pad 2 - Brake Pad An…