71 results for “Rear Axle”
- Service Information / 03 - Differential and Driveline / Description and OperationRear Axles - C235 And Rba260
REAR AXLES - C235 AND RBA260 DESCRIPTION - C235 The C235 rear axle housing has a cast iron center section with steel axle tubes. The housing contains the differential, ring and pinion gears, the axle…
- Service Information / 03 - Differential and Driveline / Description and OperationRear Axle - M250 (2021 - Present)
REAR AXLE - M250 (2021 - PRESENT) DESCRIPTION The M250 axle is used in extreme performance 4WD trucks only beginning in the 2021 model year. The M250 rear axle housing has a cast iron center section w…
- Service Information / 03 - Differential and Driveline / Removal and InstallationC235 – Thermal Rear Axle
C235 – THERMAL REAR AXLE REMOVAL Disconnect and isolate the negative battery cable(s) (Refer to 08 - Electrical/Battery System/Standard Procedure) . Raise and support the vehicle (Refer to 04 - Vehicl…
- Service Information / 03 - Differential and Driveline / VALVES / Removal and InstallationThermal Rear Axle Coolant Lines
THERMAL REAR AXLE COOLANT LINES REMOVAL Raise and support the vehicle (Refer to 04 - Vehicle Quick Reference/Hoisting/Standard Procedure) . Drain the cooling system (Refer to 09 - Engine/Cooling Syste…
- Service Information / 03 - Differential and Driveline / SHAFTS, Axle/Drive/Half / Removal and InstallationAxle Shaft - C235
…Junction Block Brake Line Flare Nut 22 N·m (16 Ft. Lbs.) – Front and Rear Brake Hose to Bracket Bolt 20 N·m (15 Ft. Lbs.) – Hydraulic Control Unit (HCU) Inlet Brake Line Flare Nuts 25 N·m (18 Ft. Lbs…
- Service Information / 03 - Differential and Driveline / SHAFTS, Axle/Drive/Half / Removal and InstallationAxle Shaft - M250
…4 - Vehicle Quick Reference/Hoisting/Standard Procedure) . Remove the rear brake rotor (Refer to 05 - Brakes, Base/Hydraulic/Mechanical/ROTOR, Brake/Removal and Installation) . Using a hammer and punc…
- Service Information / 03 - Differential and Driveline / SHAFTS, Axle/Drive/Half / Removal and InstallationAxle Shaft - Rba260
…Junction Block Brake Line Flare Nut 22 N·m (16 Ft. Lbs.) – Front and Rear Brake Hose to Bracket Bolt 20 N·m (15 Ft. Lbs.) – Hydraulic Control Unit (HCU) Inlet Brake Line Flare Nuts 25 N·m (18 Ft. Lbs…
- Service Information / 03 - Differential and Driveline / SHAFTS, Axle/Drive/Half / Removal and InstallationRear Driveshaft
REAR DRIVESHAFT REMOVAL Raise and support the vehicle (Refer to 04 - Vehicle Quick Reference/Hoisting/Standard Procedure) . If equipped, remove the skid plate (Refer to 13 - Frame and Bumpers/Under Bo…
- Service Information / 03 - Differential and Driveline / Diagnosis and TestingAxle Diagnosis
…e the vehicle and load the differential. If bearing noise occurs, the rear pinion bearing is the source of the noise. If the bearing noise is heard during a coast, the front pinion bearing is the sour…
- Service Information / 03 - Differential and Driveline / BEARINGS / Removal and InstallationAxle Shaft Bearing - M250
…4 - Vehicle Quick Reference/Hoisting/Standard Procedure) . Remove the rear brake rotor (Refer to 05 - Brakes, Base/Hydraulic/Mechanical/ROTOR, Brake/Removal and Installation) . Using a hammer and punc…
- Service Information / 03 - Differential and Driveline / SEALS / Removal and InstallationFront Axle Seals - 215fd
…Junction Block Brake Line Flare Nut 22 N·m (16 Ft. Lbs.) – Front and Rear Brake Hose to Bracket Bolt 20 N·m (15 Ft. Lbs.) – Hydraulic Control Unit (HCU) Inlet Brake Line Flare Nuts 25 N·m (18 Ft. Lbs…
- Service Information / 03 - Differential and Driveline / SEALS / Removal and InstallationAxle Seal - C235
…Junction Block Brake Line Flare Nut 22 N·m (16 Ft. Lbs.) – Front and Rear Brake Hose to Bracket Bolt 20 N·m (15 Ft. Lbs.) – Hydraulic Control Unit (HCU) Inlet Brake Line Flare Nuts 25 N·m (18 Ft. Lbs…
- Service Information / 03 - Differential and Driveline / SEALS / Removal and InstallationAxle Seal - Rba260
…Junction Block Brake Line Flare Nut 22 N·m (16 Ft. Lbs.) – Front and Rear Brake Hose to Bracket Bolt 20 N·m (15 Ft. Lbs.) – Hydraulic Control Unit (HCU) Inlet Brake Line Flare Nuts 25 N·m (18 Ft. Lbs…
- Service Information / 05 - Brakes / 05 - Brakes, Base / Hydraulic/Mechanical / ADAPTER, Disc Brake Caliper / Removal and InstallationRear Brake Caliper Adapter
REAR BRAKE CALIPER ADAPTER REMOVAL CAUTION: Never allow the disc brake caliper to hang from the brake hose. Damage to the brake hose will result. Provide a suitable support to hang the caliper securel…
- Service Information / 03 - Differential and Driveline / SHAFTS, Axle/Drive/Half / Removal and InstallationFront Driveshaft
…ved, NEW fasteners must be installed and tightened to specifications. REAR DRIVESHAFT CALLOUT DESCRIPTION SPECIFICATION COMMENT 1 Rear Driveshaft to Rear Axle Bolts M10 Rear Driveshaft to Rear Axle Bo…
- Service Information / 00 - Vehicle Data / Vehicle Information / International Vehicle Control and Display SymbolsDescription
…11 Airbag Warning Light 43 Front Axle Lock 12 Passenger Airbag Off 44 Rear Axle Lock 13 Failure Of Anti-Lock Braking System 45 Park Asist Indicator 14 Hybrid Electric Vehicle (HEV) Brake Regenerative…
- Service Information / 00 - Vehicle Data / Vehicle Information / Vehicle Certification LabelDescription
…manufacture. Gross Vehicle Weight Rating (GVWR). The gross front and rear axle weight ratings (GAWR's) are based on a minimum rim size and maximum cold tire inflation pressure. Vehicle Identification…
- Service Information / 02 - Front Suspension / Air Suspension / Standard ProcedureComplete System Fill
…Relief Valve 3 - Nitrogen Tank 6 - Line On/Off Valve Remove the right rear splash shield to expose the reservoir (Refer to 23 - Body/Exterior/SHIELD, Splash/Removal and Installation) . Remove the rese…
- Service Information / 02 - Front Suspension / Front, Independent Front Suspension / Diagnosis and TestingDiagnosis And Testing
…ssure 1. Inflate tires to recommended pressure. 2. Incorrect front or rear wheel toe 2. Check and reset front wheel toe. 3. Worn wheel bearings 3. Replace wheel bearing. 4. Worn control arm bushings 4…
- Service Information / 02 - Front Suspension / Wheel Alignment / Technical SpecificationsSpecifications
…fter setting toe. Positive toe is toe-in and negative toe is toe-out. Rear Wheel Alignment Measurement Check Specifications Individual Toe Total Toe** Thrust Angle* Camber – Left or Right* Cross Cambe…
- Service Information / 03 - Differential and Driveline / Standard ProcedureC235 Drain And Refill
…. Raise and support the vehicle. Place a suitable drain pan under the rear axle housing. 1 – Drain Plug 2 – Fill Plug Remove the fill plug. Remove the drain plug and allow the fluid to drain. Install…
- Service Information / 03 - Differential and Driveline / Standard ProcedureM250 Drain And Refill
…. Raise and support the vehicle. Place a suitable drain pan under the rear axle housing. Remove the fill plug. Remove the drain plug and allow the fluid to drain. 1 – Drain Plug Install the drain plug…
- Service Information / 03 - Differential and Driveline / Standard ProcedureRba260 Drain And Refill
…Hoisting - Standard Procedure) . Place a suitable drain pan under the rear axle housing. Remove the fill plug. 1 - Drain Plug 2 - Fill Plug Remove the drain plug and allow the fluid to drain. Install…
- Service Information / 03 - Differential and Driveline / AdjustmentsAdjustments - C235
…line is the last six digits of the part number. 1 - Pinion Flange 4 - Rear Pinion Bearing 2 - Crush Sleeve 5 - Pinion Gear 3 - Last Six Digits of Part Number 6 - Rear Pinion Bearing Cup Compensation f…
- Service Information / 03 - Differential and Driveline / AdjustmentsAdjustments - M250
…6739 , Pinion Block Pinion Head Bearing Remover Blocks 2076400030 and rear pinion bearing onto Screw Screw 6741 . Insert assembled pinion block, pinion height block, rear bearing and screw into the ho…
- Service Information / 03 - Differential and Driveline / AdjustmentsAdjustments - Rba260
…d with select shims. The shim is placed on the pinion gear behind the rear pinion bearing. Calculating the pinion depth variance will require some simple math. Subtract the number etched in the pinion…
- Service Information / 03 - Differential and Driveline / Technical SpecificationsTorque Specifications
…ved, NEW fasteners must be installed and tightened to specifications. REAR DRIVESHAFT CALLOUT DESCRIPTION SPECIFICATION COMMENT 1 Rear Driveshaft to Rear Axle Bolts M10 Rear Driveshaft to Rear Axle Bo…
- Service Information / 03 - Differential and Driveline / Removal and Installation215fd - 3.0l Diesel
…tuator wire harness connector. 1 - Wire Harness Connector Support the rear of engine with a safety stand or jack. Support the front axle with a suitable jack. Remove the three isolator mounting bolts.…
- Service Information / 03 - Differential and Driveline / Removal and Installation215fd - 3.6l Engine
…tuator wire harness connector. 1 - Wire Harness Connector Support the rear of engine with a safety stand or jack. Support the front axle with a suitable jack. Remove the three isolator mounting bolts.…
- Service Information / 03 - Differential and Driveline / Removal and Installation215fd - 5.7l - 6.2l Engine
…r. 1 - Front Axle Disconnect (FAD) Wier Harness Connector Support the rear of engine with a safety stand or jack. Support the front axle with a suitable jack. Remove the three isolator mounting bolts.…
- Service Information / 03 - Differential and Driveline / Removal and InstallationC235 – Without Air Suspension
…Vehicle Quick Reference/Hoisting - Standard Procedure) . Remove both rear wheels (Refer to 22 - Tires and Wheels/Removal and Installation) . Disconnect both rear wheel speed sensor wire harness conne…
- Service Information / 03 - Differential and Driveline / Removal and InstallationC235 – With Air Suspension
…r to 08 - Electrical/Battery System/Standard Procedure) . Remove both rear wheels (Refer to 22 - Tires and Wheels/Removal and Installation) . Disconnect both rear wheel speed sensor wire harness conne…
- Service Information / 03 - Differential and Driveline / Removal and InstallationM250
…Vehicle Quick Reference/Hoisting - Standard Procedure) . Remove both rear wheels (Refer to 22 - Tires and Wheels/Removal and Installation) . Remove the wheel speed sensor bolts and remove the wheel s…
- Service Information / 03 - Differential and Driveline / Removal and InstallationRba260 – Without Air Suspension
…Vehicle Quick Reference/Hoisting - Standard Procedure) . Remove both rear wheels (Refer to 22 - Tires and Wheels/Removal and Installation) . Disconnect both rear wheel speed sensor wire harness conne…
- Service Information / 03 - Differential and Driveline / Removal and InstallationRba260 – With Air Suspension
…r to 08 - Electrical/Battery System/Standard Procedure) . Remove both rear wheels (Refer to 22 - Tires and Wheels/Removal and Installation) . Disconnect both rear wheel speed sensor wire harness conne…
- Service Information / 03 - Differential and Driveline / BEARINGS / Removal and InstallationDriveshaft Center Bearing
DRIVESHAFT CENTER BEARING REMOVAL Remove the rear driveshaft (Refer to 03 - Differential and Driveline/SHAFTS, Axle/Drive/Half/Removal and Installation) . Make installation reference marks on rear sha…
- Service Information / 03 - Differential and Driveline / GEAR, Ring and Pinion / Removal and InstallationRing And Pinion Gear - C235
…drift punch. 1 – Drift Punch 2 – Front Pinion Bearing Cup Remove the rear pinion bearing cup from the housing using a drift punch. 1 – Drift Punch 2 – Rear Pinion Bearing Cup Remove the pinion depth…
- Service Information / 03 - Differential and Driveline / GEAR, Ring and Pinion / Removal and InstallationRing And Pinion Gear - M250
…DISCARD the collapsible spacer from the pinion gear shaft. Remove the rear pinion bearing from pinion gear shaft using the Bridge 938 , Puller Press, Carrier Bearing 2022100030 , and Pinion Head Beari…
- Service Information / 03 - Differential and Driveline / GEAR, Ring and Pinion / Removal and InstallationRing And Pinion Gear - Rba260
…drift punch. 1 – Drift Punch 2 – Front Pinion Bearing Cup Remove the rear pinion bearing cup from the housing using a drift punch. 1 – Drift Punch 2 – Rear Pinion Bearing Cup Remove the collapsible s…
- Service Information / 03 - Differential and Driveline / SEALS / Removal and InstallationPinion Seal - 215fd
…ved, NEW fasteners must be installed and tightened to specifications. REAR DRIVESHAFT CALLOUT DESCRIPTION SPECIFICATION COMMENT 1 Rear Driveshaft to Rear Axle Bolts M10 Rear Driveshaft to Rear Axle Bo…
- Service Information / 03 - Differential and Driveline / SEALS / Removal and InstallationPinion Seal - C235
…eline/SHAFTS, Axle/Drive/Half/Removal and Installation) . Install the rear brake components (Refer to 05 - Brakes, Base/Hydraulic/Mechanical/ROTOR, Brake/Removal and Installation) . Remove the support…
- Service Information / 03 - Differential and Driveline / SEALS / Removal and InstallationPinion Seal - M250
…4 - Vehicle Quick Reference/Hoisting/Standard Procedure) . Remove the rear brake rotors (Refer to 05 - Brakes, Base/Hydraulic/Mechanical/ROTOR, Brake/Removal and Installation) . Remove the rear drives…
- Service Information / 03 - Differential and Driveline / SEALS / Removal and InstallationPinion Seal - Rba260
…eline/SHAFTS, Axle/Drive/Half/Removal and Installation) . Install the rear brake components (Refer to 05 - Brakes, Base/Hydraulic/Mechanical/ROTOR, Brake/Removal and Installation) . Remove the support…
- Service Information / 04 - Vehicle Quick Reference / Fuse - Relay Locations and Types / SpecificationsUnderhood Power Distribution Center
…– – Spare F17 – 20 Amp Yellow Air Suspension F18 – 15 Amp Blue AGS / Rear Axle Cooling Valve / Active Air Dam F19 – – Spare F20 – 20 Amp Yellow Adjustable Pedals F21 – – Spare F22 50 Amp Red – I Air…
- Service Information / 04 - Vehicle Quick Reference / Jump Starting / Standard ProcedureJump Starting
…HIS WAY. PUSHING WITH ANOTHER VEHICLE MAY DAMAGE THE TRANSAXLE OR THE REAR OF THE VEHICLE. CAUTION: Do not use a portable battery booster pack or any other booster source with a system voltage greater…
- Service Information / 04 - Vehicle Quick Reference / Maintenance Schedules / DescriptionNorth America - Diesel
…d ends, and replace if necessary. X X X X X X X Inspect the front and rear axle fluid. If gear oil leakage is suspected, check the fluid level. If using your vehicle for police, taxi, fleet, off-road…
- Service Information / 04 - Vehicle Quick Reference / Maintenance Schedules / DescriptionNorth America - Gas
…d ends, and replace if necessary. X X X X X X X Inspect the front and rear axle surfaces. If gear oil leakage is suspected, check the fluid level. If using your vehicle for police, taxi, fleet, off-ro…
- Service Information / 04 - Vehicle Quick Reference / Maintenance Schedules / DescriptionNorth America - Trx
…accessory drive belts replace if necessary. X X Inspect the front and rear axle fluid. Change if using your vehicle for any of the following: police, taxi, fleet, sustained high speed driving, off-roa…
- Service Information / 04 - Vehicle Quick Reference / Maintenance Schedules / DescriptionBrazil
…, and replace if necessary. X X X X X X X X X X Inspect the front and rear axle surfaces. If gear oil leakage is suspected, check the fluid level. If using your vehicle for police, taxi, fleet, off-ro…
- Service Information / 04 - Vehicle Quick Reference / Maintenance Schedules / DescriptionLatin America - Diesel
…d ends, and replace if necessary. X X X X X X X Inspect the front and rear axle fluid. If gear oil leakage is suspected, check the fluid level. If using your vehicle for police, taxi, fleet, off-road…
- Service Information / 04 - Vehicle Quick Reference / Maintenance Schedules / DescriptionLatin America - Gas
…, and replace if necessary. X X X X X X X X X X Inspect the front and rear axle surfaces. If gear oil leakage is suspected, check the fluid level. If using your vehicle for police, taxi, fleet, off-ro…
- Service Information / 04 - Vehicle Quick Reference / Maintenance Schedules / DescriptionLatin America - Trx
…accessory drive belts replace if necessary. X X Inspect the front and rear axle fluid. Change if using your vehicle for any of the following: police, taxi, fleet, sustained high speed driving, off-roa…
- Service Information / 04 - Vehicle Quick Reference / Maintenance Schedules / DescriptionMiddle East
…& correct stowage Replace the air conditioning filter Inspect front & rear axle oil, change if using your vehicle for police, taxi, fleet, off-road, or frequent trailer towing Replace the engine air f…
- Service Information / 04 - Vehicle Quick Reference / Towing / Standard ProcedureTowing
…en securing the vehicle to a flatbed truck, do not attach to front or rear suspension components. Damage to your vehicle may result from improper towing. CAUTION: Towing this vehicle in violation of t…