Technical Specifications
General Specifications - Rba260
▸Contents: 03 - Differential and Driveline
Description and Operation
Diagnosis and Testing
ASSEMBLY, Differential
Disassembly and Assembly
Actuator/Motor
GEAR, Ring and Pinion
Removal and Installation
Joints
SHAFTS, Axle/Drive/Half
Valves
Removal and Installation
AXLE
| DESCRIPTION | SPECIFICATION |
|---|---|
|
Axle Ratio |
3.92 |
|
Axle Shaft End Play |
0.13 mm (0.005 in.) - 0.38 mm (0.015 in.) |
|
Axle Shaft Flange Runout |
0.130 mm (0.005 in.) |
|
Pinion Torque To Rotate |
0.5 - 3.1 N·m (4 - 27 in. lbs.) |
|
Ring Gear Diameter |
260 mm (10.24 in.) |
|
Ring Gear Backlash |
0.05 - 0.20 mm (0.002 - 0.008 in.) |
|
Fill Level - From Bottom of Fill Hole |
3 mm (1/8 in.) ± 3 mm (1/8 in.) (bend a zip-tie at a 90º angle to use as a dip stick) |